RENT / DEDITEC RO-ETH/LC-O64-M64
€100.00
Tax excluded
Product highlights
- 10/100 Mbit Ethernet interface with webinterface
- Open ethernet protocol
- 64 Optocoupler inputs
- 15 - 24V AC/DC switching voltage (opt. 5 - 15V AC/DC)
- 16 Bit counter for each channel (up to 100Hz)
- Filter for counter and flipflops configurable (5ms - 255ms)
- LED status indication for each input channel
- 64 Optocoupler outputs / Mosfet (30V DC / 2A)
- LED status indication for each output channel
- Timeout output protection via software configurable
- Galvanic isolation via optocoupler
- Din rail module
- Suitable for DIN rail mounting
Technical data
Ethernet-Interface
Power Supply | 7 to 24V DC (by a double-pole pluggable screw clamp) |
Interface | 10/100 Mbit Ethernet Configuration over web interface (IP-addr, netmask, ...) One LED for each 3,3V and 5V voltage feed |
API-library | Easy to implement C library to access the inputs and outputs |
Control-LED | Ethernet activity ERROR Input state change (only for digital outputs) Timeout (only for outputs) I/O Module access |
Optocoupler-Input-Module
Electrical data | 64 Opto-In-Inputs 15 - 24V DC / AC switching voltage (optional 5 - 15V DC / AC) Isolation voltage 2,5KV (AC) for 1 minute Max inputcurrent: 10mA Input resistance: 2K2 at 15-24V, 1K bei 5-15V |
Input-state marker | Detects a change from low to high and high to low Recognizes input-state changes between two reads Input-state marker will be reseted on read |
Input counter | 16 bit counter for each input Maximum counting operations: 65535 After memory overflow -> reset to 0 Internal counting logic (RO-CAN, RO-USB, RO-SER): up to 100 Hz Internal counting logic (RO-ETH): up to 5Hz Programmable filter for input channels (flip-flops and counter) Minimum low or high pulse duration: 5ms...255ms |
Activity-LED | One LED for each output channel |
Connectors | 16 pin pluggable terminal block each 8 inputs |
MOS-Output-Module
Outputs | 64 Optocoupler outputs Galvanic isolated using Optocoupler max. permanent load of 2A DC max. switching voltage: 30V DC min. switching voltage: 2.8V DC max. switching power: 60W DC total load: 12A each 8 outputs logical null = MOSFET off; logical one = MOSFET on |
Activity-LED | One LED for each output channel |
Timeout-Function | Selectable time-out protection in case the module can not be reached. Following commands are available:
|
Connectors | 10 pin pluggable terminal block for each 8 outputs |
General
Operating temperature | +10°C...+50°C |
Dimensions | 413 mm x 122 mm x 51,5 mm (lxwxh) |