RENT / SONY BVW 75P
This is an edit controllablle recorder/player Betacam SP machine.
Similar to the BVW-70 it also incorporates Dynamic Tracking along with four audio tracks and VITC timecode.
It is well established as the workhorse machine of the analogue Betacam range.
Video
Video performance with Oxide Particle Tape
Bandwidth (50% Modulation)
Luminance: 25Hz to 4.0MHz +0.5/-6.0dB
Chrominace: 25 to 1.5MHz +0.5/-3.0dB
S/N Ratio
Luminance (Component IN/OUT): > 46dB
Chrominance: > 48dB (SC Trap off) K-factor (2T-pulse): < 4%
Y/C Delay: < 20ns
Video performance with Metal Particle Tape Bandwidth (50% Modulation)
Luminance: 25Hz to 5.5MHz +0.5/-3.0dB
Chrominace: 25 to 1.5MHz +0.5/-1.5dB
S/N Ratio
Luminance (Component IN/OUT): > 46dB
Chrominance: > 48dB (SC Trap off) K-factor (2T-pulse): < 3%
Y/C Delay: < 20ns
Signal Inputs Video Inut 1 Composite BNC 1.0Vp-p, 75 ohms, unbalanced sync negative
Component Input 1: BNC x3
Y: 1.0Vp-p, 75 sync negative
R-Y: 0.7Vp-p, 75 ohms
B-Y: 0.7Vp-p, 75 ohms
DUB/Component Input 2: 12-pin female Sony Connetor
Y: 1.0Vp-p, 75 ohms sync negative
R-Y: 0.7Vp-p, 75 ohms
B-Y: 0.7Vp-p, Reference Input: BNC 1.0Vp-p, 75 ohms, unbalanced sync negative Signal Outputs Video Output 1,2: BNC 1.0Vp-p, 75 ohms, unbalanced sync negative
Video Output 3 (Super): BNC 1.0Vp-p, 75 ohms, unbalanced sync negative, with or without character insertion
DUB/Component Output 1: 12-pin female Sony Connetor
Y: 1.0Vp-p, 75 ohms sync negative
R-Y: 0.7Vp-p, 75 ohms
B-Y: 0.7Vp-p, 75 ohms
Component Output 2: BNC x3
Y: 1.0Vp-p, 75 sync negative
R-Y: 0.7Vp-p, 75 ohms
B-Y: 0.7Vp-p, 75 ohms
Audio
Longitudinal Audio Performance with Oxide partice Tape & without noise reduction Frequency Response: 50Hz to 15kHz +-3.0dB
S/N Ratio: >62dB
Distortion (at 1kHz) at operational level (+4dBu): < 3%
Wow and flutter (DIN 45507): < 0.1%rms
Crosstalk > 60dB (at 1kHz)
Longitudinal Audio Performance with Metal partice Tape & noise reduction Frequency Response: 50Hz to 15kHz +1.0/-2.0dB
S/N Ratio: >68dB
Distortion (at 1kHz) at operational level (+4dBu): < 1%
Wow and flutter (DIN 45507): < 0.1%rms
Stereo Phase +-20°
Crosstalk > 71dB (at 1kHz)
FM Audio Performance with Metal partice Tape Frequency Response: 50Hz to 20kHz +0.5/-2.0dB
S/N Ratio: > 72dB
Distortion (at 1kHz) at operational level (+4dBu): < 0.5%
Stereo Phase +-10°
Crosstalk >70dB (at 1kHz)
Signal Inputs Audio Line Input CH-1/2,3/4: XLR, 3-pin male. +4dBu, 600 ohm balanced
Time Code Input: XLR, 3-pin male 0.5 to 2.8Vp-p, 600 ohms, balanced
Signal Outputs Audio Line Output CH-1/2,3/4: XLR, 3-pin male. +4dBu, 600 ohm balanced
Selected Output: XLR, 3-pin male +4dBu, 600 ohm balanced
Headphones: Stereo Jack, -12dBu, 8 ohms unbalanced
Time Code Output: XLR, 3-pin male 2.2Vp-p, 600 ohms, balanced
General
Power requirements: AC 90 to 265V, 48 to 64Hz
Power Consumption: 175W
Operating Temperature: 5°C to 40°C ( 41°F to 104°F )
Storage Temperature: -20°C to 60°C ( -4°F to 140°F )
Humidity: Less then 80% (relative humidity)
Mass: 28kg (62 lb)
Tape Speed: 101.51mm/s
Playback time: More than 100 mins with BCT-90MLA
Fast forward time: Less than 90 Secs with BCT-90MLA
Search speed
Shuttle: Still, 1/30, 1/10, 1/5, 1/2, 1, 2, 5 and 25 times normal in forward & reverse directions
Var: Still, 1/30, 1/10, 1/5, 1/2, 1 times normal in forward & reverse directions & 2 times normal in forward
Jog: Still to 1 times normal in forward & reverse directions
Dynamic Tracking Range: -1 to +2 times normal speed
Dimensions: Approx 427mm (W) x 237mm (H) X 520mm (D)
Other
Remote 1 IN/OUT: 9-pin female D connector RS-422 Remote 2: 36-pin connector
TBC Remote: 15-pin male D connector
Processor adjustment range, with optional UVR-60P
Video level: +-3dB
Chroma level: +-3dB
Black level: 0 to 110mV
System SubCarrier Phase: 360°
System sync phase: -1 to 3 microseconds
Y/C delay: +-50 ns